Liectroux A338 Robot Vacuum Cleaner Sweep, Mop, Vacuum, Sterilization, LCD Touch Screen, Auto Charge, Schedule Cleaning
Easily handle each kind of
Capable of cleaning a house with a size of 150-200 square meters,
continuously working for 120minutes
Get to know the cleaning effect of A338
Walking on your feet freely
The floor cleaned by the robot vacuum cleaner is so clean without bacteria
and dust so that you could walk on your feet at ease.
The charm of A338
Keep the house clean and tidy every day
The functions of “ Sweep, Mop, Vacuum, Sterilization” makes the cleaning more thoroughly!
Easy to use with 3 smart touch buttons in the big LCD touch screen.
In order to give users good visual sense, Liectroux Robot Vacuum Cleaner A338 is designed elaborately with smooth streamline and appreciating
The robot will do the cleaning at scheduled time and when you
return home, the house has been cleaned.
Each production procedure is under strict tests to make sure of the
Various cleaning modes
out all dust and rubbish
The cleaning effect
The signal of recharging extends to 180 degree so that the robot
will go back to the charging station at low battery automatically.
There are four infrared sensors that will prevent the robot from
running into furniture or other barriers.
The creative two-infrared virtual blocker better controls the cleaning areas and keeps the robot away from your space.
Keep Home Healthy
The UV light disinfects the bacteria mites so as to keep home healthy.
Two-infrared Virtual Blocker
Up-down wheels make the robot cross the barriers within height of 15mm easily.
There are anti-fall sensors on the bottom that keeps the robot from
falling downstairs so that the robot will not be damaged or do harm to your furniture.
Modular design makes daily
and self maitenance
Daily maintenance so easy
How to match the remote control with the robot vacuum cleaner?
First press "ENTER" button on the remote control for a few seconds and
turn on the switch on the right side of the robot. If you could hear "Beep"
twice, then the matching is done. The remote control could be used then. If you couldn't hear "Beep" twice, repeat above steps.
Take off the dustbin
Use your thumb to press the dustbin button on the top of the robot, and the other four fingers on the bottom of the robot, then draw out the dustbin
backwards. Pour out the dust. (Please note the fan assembly should not
be washed. Please refer to the User's Manual on fan assembly. )
Install Virtual Blocker
Open the cover at the bottom of the virtual blocker, and install the battery as the picture. The negative side is close to the knob and the other is the
Replace HEPA Filter
Break out the fastener on the right side of the dustbin thus open the HEPA Filter bracket. Press the bracket with one hand making the fastener off the HEPA Filter and take out the HEPA Filter with the other hand, then replace the new HEPA Filter. (Please refer to User's Manual for details.)
HEPA Filter Cleaning
Take off the HEPA Filters as the above described, then use the cleaning brush to wipe out the rubbish and dust. (As the left picture)
Install the mopping pad vertically with the two card holes matching the
two card slots on the bottom of the robot, then put the mopping pad
horizontally. (Please refer to User's Manual for details User’s Manual.)
Choose one robot best for you
Cleaning with central brush
Intelligent Dust Detection
2200 mAH Ni-MH