LIECTROUX X5S Robot Vacuum Cleaner, WIFI APP Control,Gyroscope Navigation,Switchable Water Tank
2.Enjoy the convenience
3.Four Cleaning Mode
4.Schedule at any time
Cleaning time setting
The charm of X5S
APP Control, Good to use
Gyroscope navigation system and zigzag cleaning
With Gyroscope navigation and zigzag cleaning to improve the cleaning efficiency.
Intelligent Mapping & Planned Cleaning
Doing a regular and efficient job
Working with a definite direction
Recognize barriers without Rushing.
Zigzag Cleaning, Low Missing Rate
High Coverage/ Low Repetition/ Low Missing
When the robot is at low battery, it will return to the charging station to get fully charged to start another cleaning.
Regular Planned High-efficient
Say goodbye to the old random cleaning with zigzag cleaning
Regular Planned High-efficient
One-time full-charged lasts 90-120mins, one-time cleaning covers 150-200 square meters.
2600mAh Lithium-ion Battery Lasting Long
Thanks to the gyroscope navigation, X5S can detect the house
environment and adjust its cleaning path regularly.
Intelligent Cleaning Path
The cleaning effect
Combine with sweeping and mopping as the dustbin box and
water tank are switchable.
Sweep First, Then Mop
Sweeping and Mopping, Separated Dual Cleaning
300ml of big water tank, meets the water to do one time cleaning.
Even permeation, keeping wet, mopping out the besmirch and dust.
V-shaped Roller Brush + Fur Brush
Strong Suction, No fear of corners, Part from hair and dust
300ml of big water tank Good wet
Infrared sensor, Not to fall down stairs.
Floating the cleaning assembly
Cling to the floor to do the cleaning
Cling to the floor,making cleaning easier.
Anti-falling/ Safe and rest-assured
A.Check side brushes for damage or foreign object on the brush.
B.Clean the side brushes
C.Remove the screws of the side brushes, Replace brushes with new ones, Use screws to lock the new brushes in place
Daily maintenance so easy
Clean Side Brush
Remove the main brush set from the robot:
Push the Brush Guard Release on the main brush, then take out the roller brush and fur brush to clean.
Clean Sensors and Charging Poles
Clean the sensors and charging poles per week make sure the robot is
Wipe the sensor window and auto charging sensors with a soft dry cloth.
Clean charging contacts on self charging base.
Clean vacuum intake and dust sensors as shown in the pictures.
Clean the Roller Brush
Please clean the roller brush by the provided cleaning brush or by water. (Do not install until roller brush is dry.)
Cleaning of Dust Box and Filtering Cloth
Please clean the dust box, filtering cloth after every time of use.
A.Push the button of the filtering box cover, clean the filtering box and
B.Clean the dust box and empty the garbage into trash bin.
Take the filtering cloth out and clean it (wash it and dry it before second use)
1）When cleaning your dust box and water tank, please make sure that
the dust box with motor CAN'T be washed. Water may damage your
2)When cleaning the mop, please do not take the mop off from the water tank, just scrub the mop under the tap by the cleaning brush.
If the side brush is damaged, it needs to be replaced. Replacement brushes can be obtained from your retailer.
1.Switch the robot cleaner off and put it up-side-down.
2.Remove the retaining screw with a screwdriver.
3.Remove the old side brush and put new one in place.
4.Replace and tighten the screw.
Replace the Side Brushes
Choose one robot best for you
Cleaning with central brush
Intelligent Dust Detection
2600 mAH Li-lon
300ml water tank+300ml dustbin box