Liectroux B3000Plus Robot Vacuum Cleaner Combine with vacuuming and mopping two functions
Combine with vacuuming and mopping two functions.
Get to know the cleaning effect of B3000Plus
Dry and Wet Moppingn
Making cleaning easier
Strong vacuuming function in the forepart and wet and dry mopping at
the back part.
300ml of water tank and four water outlets make the creeping slow and balanced,
wiping off any stubborn stains, keeping the floor clean.
The charm of B3000Plus
Please hand over to me
Acute Responsen, Play to the score.
Intelligent Frequency Conversion Motor
Frequency conversion motor always plays to the score.
It can detect the volume of the dirt and adjust the suction power.
Thus greatly improve the vacuuming effect.
The bacteria on the floor and carpet are here and there. UV sterilization keep the home healthy.
Not letting go any dust.
Suction Power with 1200pa
The cleaning effect
The robot will find the charging base to recharge at low battery.
2000MAH Battery, Strong Power
B3000Plus can easily clean up large-sized apartment with 150-200 square meters.
Once set up, you could arrange your time freely and hand over the cleaning job to B3000Plus.
The height of the robot is 9cm
B3000Plus which height is 9cm, can pass through sofa, tables
Unique design to separate the dust and rubbish, avoiding the
block of the dust collector. Prime filter and HEPA filter can filter micro dust, eradicating second-pollution.
50DB noise will not disturb you when you are at work and at rest.
Daily maintenance so easy
Clean the Roller Brush
A.Check side brushes for damage or foreign object on the brush.
B.Clean the side brushes
C.Remove the screws of the side brushes, Replace brushes with new ones, Use screws to lock the new brushes in place.
Clean Sensors and Charging Poles
Clean the sensors and charging poles per week or according to daily use to make sure the robot is well maintained.
Wipe the sensor window and auto charging sensors with a soft dry cloth.
Clean charging contacts on self charging base
Clean vacuum intake and dust sensors as shown in the pictures.
Note: After taking out dustbin, check if there is foreign object stuck or block the vacuum passage and clean it if necessary.
A.Press "PUSH" to open the dustbin cover.
B.Take out the dustbin
C.Separate HEPA filter from dustbin.
D.Pull out dustbin top cover and take out primary filter.
E.Empty dustbin and wipe the dust.
F. Wash dustbin with water.
Clean and Replace Filters
Clean filters with cleaning brush tool.
Note: Clean dustbin module when the trash icon flashes on the display
Install primary filter and HEPA filter into dustbin.
Note: 1. Install both HEPA and primary filters when they are dry.
2. Do not place HEPA and primary filters directly in the sun.
Close dustbin cover and install it into main unit.
Note: Dustbin and Filters( including HEPA and filter) could be replaced if needed.
How to handle the water tank trailing bar
1.Open the water injection hole, after water injected, stick the mop to the right place.
2.Aim at the relevant holes and assemble the trailing bar on the cleaner.
Choose one robot best for you
Cleaning with central brush
Intelligent Dust Detection
2200 mAH Ni-MH
About 90 mins