Get to know the cleaning effect of Q8000
High Cleaning Coverage,
Not Missing Any Part
Wifi APP Control And
2D Map Navigation
The Charm of Q8000
Smart and Latest Functions of Robot Vacuum Cleaner
Q8000 has the all the basic and the latest functions. It is as smart as human beings.
Make up the Missing Part, Clean the whole House Thoroughly
As the robot memories where has been cleaned and where has no. It
will make up the missing area and the edge of the wall then no any part
is missing and the whole house is cleaned thoroughly.
Wifi APP Control Easy to Use
It's easy to use with Wifi App control. Just finger's clicks, the robot vacuum will do all cleaning modes, schedule cleaning, mopping and recharging.
Q8000 will learn the whole house environment and make partition cleaning scheme. Thus the cleaning coverage is high with low repetition rate. And
not missing any part.
No Random Wandering
Save more energy
Intelligent zigzag regular cleaning path, say goodbye to the old random cleaning, less energy consumption.
High Cleaning Coverage
Ultra high speed environment
detect the whole environment
Improving Cleaning Efficiency
Advanced gyroscope navigation and mapping system building ensure the
accuracy of the map.
The cleaning effect
The suction power is adjustable. The powerful mode has strong
suction power. The less powerful mode has low noise, it is as quiet as not to disturb your work or rest.
The virtual blocker will stop the robot vacuum entering to the areas you do not want it to go so that you don't have to watch it over.
Powerful Mode/ Low Noise
The coordinate memory algorithm enables the robot vacuum to detect the environment and find the shortcut to recharge at low battery. If the charging station is not nearby, it will return to the
original point after finish cleaning at enough power, not afraid to get lost.
Big Battery Lasting Long
2000mAh Lithium Battery can lasts for 100 minutes and is enough to handle a big house of 250㎡ at a full charge.
Calculate the Shortcut Path to Recharge
The anti-falling sensors at the bottom can detect fall over 8cm to avoid falling down stairs.
Infrared sensors will protect the robot vacuum from running into
furniture and turn around in time before collision so that it will
protect itself and the furniture.
Liectroux Q8000 can climb across a slope of angle up to 15 degree and threshold of height up to 10mm.
Wet and Dry Mopping
Under Auto mode, the robot vacuum can do mopping as well. Under mopping mode, it will not vacuum and the fan and side brushes will stop working.
Climb across barriers without manual help
Daily maintenance so easy
Clean the Roller Brush
A.Check side brushes for damage or foreign object on the brush.
B.Clean the side brushes
C.Remove the screws of the side brushes, Replace brushes with new ones, Use screws to lock the new brushes in place.
Clean Sensors and Charging Poles
Clean the sensors and charging poles per week or according to daily use to make sure the robot is well maintained.
Wipe the sensor window and auto charging sensors with a soft dry cloth.
Clean charging contacts on self charging base
Clean vacuum intake and dust sensors as shown in the pictures.
Note: After taking out dustbin, check if there is foreign object stuck or block the vacuum passage and clean it if necessary.
A.Press "PUSH" to open the dustbin cover.
B.Take out the dustbin
C.Separate HEPA filter from dustbin.
D.Pull out dustbin top cover and take out primary filter.
E.Empty dustbin and wipe the dust.
F. Wash dustbin with water.
Clean and Replace Filters
Clean filters with cleaning brush tool.
Note: Clean dustbin module when the trash icon flashes on the display
Install primary filter and HEPA filter into dustbin.
Note: 1. Install both HEPA and primary filters when they are dry.
2. Do not place HEPA and primary filters directly in the sun.
Close dustbin cover and install it into main unit.
Note: Dustbin and Filters( including HEPA and filter) could be replaced if needed.
How to handle the water tank trailing bar
1.Open the water injection hole, after water injected, stick the mop to the right place.
2.Aim at the relevant holes and assemble the trailing bar on the cleaner.
Choose one robot best for you
Cleaning with central brush
Intelligent Dust Detection
2000 mAH Ni-Ion
About 90 mins