MANUAL
German
Chinese
Italian
Russia
French
Vietnamese
Ukrainian
Page Copyright © 2018 LIECTROUX ROBOTICS GmbH. All Rights Reserved.
Address: Birnbaumsmühle 65, 15234 Frankfurt/Oder, Germany
PRODUCTS
LIECTROUX Robot Vacuum Cleaner Q7000 Gyroscope Navigation Zigzag Planned Cleaning
Gyroscope Navigation
Robot Vacuum Cleaner
Q7000
Zigzag-planned Type Robot Vacuum Cleaner
Get to know the cleaning effect of Q7000
Walking on your feet freely
The floor cleaned by Q7000 is so clean without bacteria and dust
so that you could walk on your feet at ease.
The charm of Q7000
Zigzag Cleaning
Intelligent zigzag cleaning path, planned and regularly, improve the cleaning coverage.
User Friendly Design
Easy Operation
Voice prompt and touch screen operations. Just press CLEAN to start cleaning.
Small Body, Big Water Tank
Dry Sweeping, Wet Mopping
The water in the water tank can slowly wet the mop to do the mopping, thus improve the cleaning efficiency.
The design of water infection hole is accurate so that the water will
creep evenly to the mop.
The large size of dustbin enable the robot to clean a big area at one time so that you don't have to clean it frequently. Also the dustbin is washable to keep healthy and clean.
Filtering the Dust
The application of air purification standard to filter all the particles, making the air nice and clean.
Five Cleaning Modes
Auto Cleaning: Q7000 can adjust its cleaning routine automatically based on different floor types.
Spot Cleaning: Q7000 will spend more time in dirty areas.
Edge Cleaning: Q7000 will clean the edge and corner of the walls.
Zigzag Cleaning: A planned and regular cleaning mode.
Schedule Cleaning: You can schedule the cleaner to start cleaning at
scheduled time.
The Dustbin Capacity is 300ml and washable
Thanks to the gyroscope navigation, Q7000 can detect the house environment
and adjust its cleaning path regularly.
2000mAH Li-ion Battery
2000mAH Li-ion Battery lasts long and makes low energy consumption.
One-time cleaning can cover an area of 150-200㎡ in 100mins.
Gyroscope Navigation
Intelligent Cleaning Path
The cleaning effect
Q7000 will adjust its suction power according to different floor types. It will clean the floor more effectively and also save more battery
power.
Low Noise
The noise is about 50DB without disturbing your life.
Intelligent Suction Adjustment
Q7000 can find its way back to the charging station at low battery
to get recharged without manual help.
Anti-fall sensors
The infrared sensors under the bottom will automatically detect
the height drop so that the robot will not fall and get damaged.
Auto Recharge
The UV light will kill the bacteria on the floor and carpet, keeping the house clean and healthy.
Climb across barriers without
manual help
The robot can climb across a slope of angle up to 15 degree and threshold of height up to 10mm.
UV Sterilization
Daily maintenance so easy
Clean the Roller Brush
A.Check side brushes for damage or foreign object on the brush.
B.Clean the side brushes
C.Remove the screws of the side brushes, Replace brushes with new ones, Use screws to lock the new brushes in place.
Clean Sensors and Charging Poles
Clean the sensors and charging poles per week or according to daily use to make sure the robot is well maintained.
Wipe the sensor window and auto charging sensors with a soft dry cloth.
Clean charging contacts on self charging base
Clean vacuum intake and dust sensors as shown in the pictures
Clean dustbin
Note: After taking out dustbin, check if there is foreign object stuck or block the vacuum passage and clean it if necessary.
A.Press "PUSH" to open the dustbin cover.
B.Take out the dustbin
C.Separate HEPA filter from dustbin.
D.Pull out dustbin top cover and take out primary filter.
E.Empty dustbin and wipe the dust.
F. Wash dustbin with water.
Clean and Replace Filters
Clean filters with cleaning brush tool.
Note: Clean dustbin module when the trash icon flashes on the display
panel.
Install primary filter and HEPA filter into dustbin.
Note: 1. Install both HEPA and primary filters when they are dry.
2. Do not place HEPA and primary filters directly in the sun.
Close dustbin cover and install it into main unit.
Note: Dustbin and Filters( including HEPA and filter) could be replaced if needed.
How to handle the water tank trailing bar
1.Open the water injection hole, after water injected, stick the mop to the right place.
2.Aim at the relevant holes and assemble the trailing bar on the cleaner.
Diameter
Height
Weight
Battery
Dustbin Capacity
Power
Charging Time
Cleaning Time
Noise
Side Brush
Water Tank
Cleaning with central brush
Intelligent Dust Detection
UV Function
Obstacle Avoidance
Anti-drop Sensors
Voice Prompt
Auto Rechange
Remote Control
Cleaning Modes
Map Navigation
Wifi Control
34cm
9cm
3kg
2000 mAH Ni-Ion
300ml
25W
About 90 mins
50DB
Double
180ml
-----
Yes
-----
Yes
Yes
Yes
Yes
Yes
Auto/Spot/Edge/Schedule
-----
-----